Carpenter- Tilt Up Building Construction – Foundation, Slab on Grade, Tilt, Paving

Carpenter- Tilt Up Building Construction – Foundation, Slab on Grade, Tilt, Paving Responsible for performing a variety of carpentry tasks associated with prepping, pouring, placing, and finishing of concrete. Tasks include erecting and setting forms for concrete structures, foundations, buildings, and site work per specifications and drawings. Responsibilities will include but not limited to: • Ability to read and understand drawings and prints. • Build and/or assemble wood or metal forms for the construction of concrete floors, slabs, walls, columns, tilt-walls, elevated concrete slabs, elevator cores, stairways, etc. • Set and place forms to proper elevations and locations and may aid in installing reinforcing steel. • Set and erect forms using a wide variety of materials and forming systems, primarily Symon forms. • Verify accuracy of structures using a plumb bob, carpenter’s level, laser and/or digital transit. • Erect scaffolding and ladders for assembling structures above ground level. • Communicate with Foreman, or Project Manager regarding any problems arising, materials required, or any safety hazards identified. • Ensure equipment is all in safe working condition. • May help signal concrete deliverer to position truck to facilitate pouring. • Responsible for observing and complying with all safety policies and guidelines. • Assist with placement of concrete as needed. • Additional trainings may be available for equipment use on site. Such as forklifts, skid steers, excavators, etc. if you are experienced in any of these areas please reference it in the application. Requirements: • Experience in construction or contracting industry with a good work ethic. • Strong attention to detail; take pride in work. • Ability to understand blueprints. • Maintain high level of safety and adherence to all safety policies and procedures. • Basic hand tools should be brought on the first day of work (tool belt, tape measure, hand finishing tools, hammer, square, etc.). All safety/PPE will be provided and any additional power tools needed to complete the project will be available for use as well. • Must be respectful and reliable. Working Conditions: • Must be able to stand, stoop, bend, and crouch for extended periods of time up to ten (10) hours per day. • Must be able to lift in excess of 50lbs. • Exposure to the elements – heat, cold, rain, wind • Must always work safely. Vicon Construction is a concrete contractor with a strong growth projection due to our ability to provide excellent service, superior workmanship, a culture of safety and extreme concern for our customers. It is imperative that our employees exemplify the integrity and work ethic that our company was built on.