UNMANNED AIRCRAFT SYSTEM QUALITY ASSURANCE SPECIALIST (TITLE 32)

Summary This National Guard position is for a UNMANNED AIRCRAFT SYSTEM QUALITY ASSURANCE SPECIALIST (TITLE 32), Position Description Number D2694000 and is part of AASF located in West Jordan UT, with the Utah Army National Guard. IAW UTNGR 690-12 dated AUG 2022, Priority will be given to all current, onboard employees of the UTARNG. The selecting supervisor for this vacancy is Zackery Mitani. Learn more about this agency Duties Major Duties: This is not an all-inclusive list As a UNMANNED AIRCRAFT SYSTEM QUALITY ASSURANCE SPECIALIST (TITLE 32), GS-1910-11, you will: Responsible for the integration process to determine a new maintainer's proficiency and corresponding maintainer designation. Oversees the initial integration counseling event that includes but is not limited to the Aircrew Maintenance Training Program (AMTP), hangar orientation, local area orientation, basic expectations, and TUASOF responsibilities. Executes and manages the Commanders Aviation Maintenance Training Program and the Commanders Aviation and Standardization Program for UAS Crewmembers. Trains and evaluates all UAS Air Crew Member (ACM) for the Crew Chief Training Program (CCTP).Responsible for progression, currency and sustainment of ACM's. Develops Critical Task List (CTL) for Army Military Occupational Specialty (MOS) in supported units. Ensures all tasks on the CTL's are up to date and in line with current equipment and Unit Mission Essential Task List (METL). Serves as the primary AMTP trainer and evaluator for the TUASOF. Acts as the advisor to unit Commanders on the management of the AMTP and maintenance level of unit members. Trains and evaluates crewmembers in the following areas Aircraft Notebook User Training, TAMMS-A,CPC Training, Compressed Gas Cylinder Training, Electrical Hazards, Environmental/Spill Response, AGSE. Trains and Evaluates basic aviation maintenance fundamentals, basic electronics training, and electronic and mechanical maintenance of UAS. Directs on-the-job training and arranges for formal training of new employees or crewmembers. Responsible for the safe execution of all MOS specific flight line operations necessary to meet mission requirements for the applicable UAS assigned to the TUASOF. Responsible for all flight line operational support to include Site support coordination, generator and vehicle fueling operations, site maintenance, work orders, runway lighting supplies, maintaining the crash kit, FOD prevention, runway maintenance and other support tasks as directed. Ensures daily FOD (Foreign Object Debris) walk is conducted to clear large rocks, tools, and other debris that would create a hazard to operations. Ensures the unmanned aircraft is flight worthy and is current on maintenance servicing and inspections. Operates light utility motor vehicles, up to two and a half ton, to transport self and others to worksites that are remote from the immediate shop facility, between installation airfields, or emergency repair sites when required. Assists the Safety Officer with offsite emergency/recovery operations. Responsible for the preparation and management of forms and records required to manage maintenance, control the use, and report warranty actions and deficiencies on UAS and associated ground support equipment. Serves as the Primary Point of Contact for the notification, reporting, and implementation of all Aviation and Ground Safety messages as they pertain to the assigned TUASOF equipment. Responsible for providing accurate maintenance requirement forecasts of upcoming inspections, Responsible for verifying that correct methods, techniques, and procedures are used and that work is in accordance with Government publications and specifications. Ensures that Government property is controlled and properly maintained. Reviews work order requests and inspects for correctness and proper format to ensure completeness and audit capability. Knowledge of and access to US Army aircraft status reporting procedures and methods. Knowledge of the Global Combat Support System -Army (GCSS-A), Unit Level Logistics System - Aviation(ULLS-A) and Aircraft Notebook (ACN) programs sufficient to determine if user needs can be met by the system programs and to identify deficiencies and problems. Provides technical assistance on all UAS maintenance matters to UAS operators, UAS maintenance crews or contractor support personnel. Performs Quality Assurance (QA) inspections and evaluations of unit or facility performed unmanned aircraft system maintenance and repair, in support of organizational, intermediate, and/or depot maintenance on the UAS equipment set assigned to the unit or facility. Inspects aircraft fuselage and airframes, landing gears, tires, power trains, drive trains, fuel, electrical, hydraulic, flight controls, rotor, transmission, instruments, armaments, and/or all systems required to make the aircraft a total mission capable system to include the launchers, Tactical Automatic Landing System, Ground Control Stations, tactical vehicles, generators, environmental control units and all other ground support equipment related to the UAS system. Performs other duties as assigned. Requirements Conditions of employment MILITARY REQUIREMENTS: Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. This is an Army Dual Status Technician position which requires military membership in the Utah Army National Guard. Males born after 31 December 1959 must be registered for Selective Service. Pending analysis, you may be required to complete a new 1-year probationary period when moved to this position IAW CNGBI 1400.25. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license. Participation in direct deposit is mandatory. Medical screening will be completed upon selection for hire. Soldiers who accept a technician position may be terminated from the Bonus and Student Loan Repayment Program (SLRP). Must be able to transfer to the unit to remain compatible in the position. Must be able to obtain and maintain the appropriate security clearance of the position. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. May be required to travel by car, in military and/or commercial aircraft, and by other means of transportation as appropriate, to perform temporary duty assignments. This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration. This designation will not exceed 14calendar days per year unless otherwise approved in advance by the TAG. Qualifications *Your resume must reflect in detail how the duties and responsibilities under each position you have held with each employer meets the below listed general and specialized experience required for the position. **Must include beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week in order to determine part time vs. full time credit. GENERAL EXPERIENCE: Experience, education, or training involving planning, developing, or administering quality assurance programs (i.e., supporting the development, acquisition, production, use, maintenance, storage, and supply of products concerned with the systematic prevention of defects and non-conformances, the identification of unsatisfactory trends and conditions, and the correction of factors which may contribute to defective items). Experience using computer and automation systems. SPECIALIZED EXPERIENCE: 1 year specialized experience equivalent to at least GS-9. (Must provide SF 50 demonstrating Occupational Series 1910 to validate) OR Must have experience involving a thorough knowledge of product or range of products involved, the manufacturing methods and techniques, special processes, test and performance requirements; and skill in developing plans and programs. Experience possessed by an expert in the area of specialization able to give technical direction to otherwise competent workers. Experience determining operations when difficult and questionable phases of malfunctions are found. Experience which required significant and concrete work accomplishments (i.e. special projects, working groups, or detailing assignments) involving interpersonal contacts in a quality assurance or related field. Experience in dealing with management principles and supervisory responsibility for the function required by type of position to be filled and the organization involved. Education Substitution for specialized experience: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree or LL.M., if related **You must provide transcripts or other documentation to support your Educational claims. To receive credit for education, you must provide documentation of proof that you meet the Education requirements for this position.** All academic degrees and coursework must be completed at a college or university that has obtained accreditation or pre-accreditation status from an accrediting body recognized by the U.S. Department of Education. For a list of schools that meet this criteria, see http://www.ed.govOR Education completed in foreign colleges or universities may be used to meet the above education requirements if you can show that the foreign education is comparable to that received in an accredited educational institution in the United States. It is your responsibility to timely provide such evidence by submitting proof of creditability of education as evaluated by a credentialing agency with your application materials. More information may be found at http://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html. All documentation must be in English or include an English translation. Additional information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). MILITARY MEMBERS WITH BONUSES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). Are advised to meet with education specialist to review contract. Expand Hide  additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.