Civil Engineer/Agricultural Engineer

Department of Agriculture - Natural Resources Conservation Service · Multiple Locations

Company

Department of Agriculture - Natural Resources Conservation Service

Location

Multiple Locations

Type

Full Time

Job Description

This is an engineering position located in support of a large complex geographical area in the state. The incumbent assists the area engineer and is responsible for providing technical guidance and leadership in the overall planning, design, installation, and maintenance of the engineering phases of soil and water conservation practices.

Learn more about this agency

Conditions of Employment

You must be a US Citizen or US National.
Males born after 12/31/1959 must be Selective Service registered or exempt.
Subject to satisfactory adjudication of background investigation and/or fingerprint check. If selected you will be sent instructions on obtaining fingerprints. Please note we are not able to reimburse any fees incurred for fingerprints.
Successful completion of one-year probationary period, unless previously served.
Direct Deposit: Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify at https://www.e-verify.gov/.
Must possess and maintain a valid state motor vehicle operator's license for the type of vehicle(s) operated to perform the duties of this position.

Qualifications

Applicants must meet all qualifications and eligibility requirements by the closing date of the announcement including specialized experience and/or education, as defined below.

Basic Education Requirement:

Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics;

OR

Combination of Education & Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience.

In addition to meeting one of the Basic Requirements listed above, applicants must meet the following Minimum Qualifications Requirement in order to be considered:

Specialized Experience to qualify for the GS-07 level : You must possess at least 1 year of specialized experience equivalent to the GS-05 level or higher in Federal service, or comparable experience not gained through Federal service. Specialized experience is defined as:

Providing technical assistance and guidance in the overall planning, design, installation, and maintenance of engineering practices for soil and water conservation programs.; OR

Superior Academic Achievement in a bachelor's degree curriculum directly related to the work of the position. To qualify for superior academic achievement, you must have ONE of the following: (1) standing in the upper third of your college class or major subdivision at the time you apply; (2) grade point average of B (3.0 on a 4.0 scale) or its equivalent for all courses completed, either (a) at the time of application or (b) during the last 2 years of your undergraduate curriculum; (3) B+ (3.5 on a 4.0 scale) or its equivalent for all courses completed in a related discipline, either (a) at the time of application or (b) during the last 2 years of your undergraduate curriculum; OR (4) election to membership in one of the national honorary scholastic societies that meets the requirements of the Association of College Honor Society;

OR

Substitution of education in lieu of specialized experience for the GS-07 level: One full year of progressively higher level graduate education in engineering or related field;

OR

Combination of Education and Experience: A combination of graduate-level education and experience, as described above, may be used to qualify for this position. This combination must have equipped you with the necessary knowledge and/or experience to successfully perform the duties of this position. Combinations of experience and education must total at least 100% as outlined in OPM Qualifications policy.

Specialized Experience to qualify for the GS-09 level : You must possess at least 1 year of specialized experience equivalent to the GS-07 level or higher in Federal service, or comparable experience not gained through Federal service. Specialized experience is defined as:

Assisting higher graded engineers or field personnel with field investigations and surveys;
Performing checks of design computations, preliminary and final drawings, and specifications on engineering practices;

OR

Substitution of education in lieu of specialized experience for the GS-09 level: 2 year(s) of progressively higher level graduate education leading to a Masters or equivalent graduate degree in engineering or related discipline;

OR

Combination of Education & Experience: A combination of graduate-level education and experience, as described above, may be used to qualify for this position. Combinations of experience and education must total at least 100% as outlined in OPM Qualifications policy.

For more information on the qualifications for this position, click here: all-professional-engineering-positions-0800.pdf (opm.gov)

Education

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

If you are relying on your education to meet qualification requirements:

You must submit a copy of your transcripts to include course number, title, completion and grade. Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. If a relevant course is not clearly qualifying (e.g. special topic, seminar, research, thesis, obscure or misleading course title, etc.), please submit an official course syllabi and/or detailed course description from the university/college for that particular course to ensure you are properly evaluated. Please note that qualifications determinations are based solely on the information submitted for each particular vacancy announcement.

Important: If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. Click on this link for more information.

Failure to provide all of the required documents/information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.

Additional information

Locality Pay: The salary for each location may vary depending on locality. Locality tables may be found at https://www.opm.gov/policy-data-oversight/pay-leave/salaries-wages/.
Career Transition Assistance Plan (CTAP), Reemployment Priority List (RPL), or Interagency Career Transition Assistance Plan (ICTAP): Visit the OPM website for information on how to apply as a CTAP, RPL, or ICTAP eligible. To exercise selection priority for this vacancy, CTAP/RPL/ICTAP candidates must meet the basic eligibility requirements and all selective factors. CTAP/ICTAP candidates must be rated and determined to be well qualified (or above) based on an evaluation of the competencies listed in the How You Will Be Evaluated section. When assessed through a score-based category rating method, CTAP/ICTAP applicants must receive a rating of at least 85 out of a possible 100.
Promotion Potential: If you are selected for a position with further promotion potential, you will be placed under a career development plan, and may be non-competitively promoted if you successfully complete the requirements and if recommended by management. However, promotion is neither implied nor guaranteed.
Physical Demands: The work requires some physical exertion such as long periods of standing, traversing steep slopes and rough construction sites, recurring bending and stooping jumping across shallow ditches, walking in soft, muddy and slippery conditions, and lifting and carrying equipment and samples that weigh up to 50 pounds.
Work Environment: Work is typically performed in the field and in an office setting. Frequent trips to field sites involve exposure to construction equipment and the environment, and extreme temperatures of hot and cold. Protective gear and clothing such as a hard hat, boots, and gloves may be necessary during filed visits and in the area of moving machinery. Exposure to noise levels common to construction sites with large earthmoving equipment can be expected. There will be exposure to disease carrying insects and irritating plants. Field work is performed on a regular and recurring basis.
PLEASE NOTE: In the interest of filling these positions as efficiently as possible, we are requiring the following:
- If called for an interview, applicants must be available to interview within 3 business days of being contacted.
- If a tentative job offer is extended, selectee will have 2 business days in which to accept or decline.
This position is eligible for telework within the local commuting area of the position and other flexible work arrangements. Current USDA policy includes telework for an 8 hour work day, 4 days per week; other flexibilities are possible dependent upon availability and/or the position and its associated duties. Employee participation is at the discretion of the supervisor.
Recruitment and/or relocation incentives may be authorized.

A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.

Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.