General Engineer
Company
Department of the Interior - Interior, Bureau of Indian Affairs
Location
Albuquerque, New Mexico Albuquerque, New Mexico
Type
Full Time
Job Description
Summary
These positions are located in the Office of Facilities ,Property and Safety Management (OFPSM). The incumbents utilize knowledge of engineering to provide oversight of construction projects to include the planning, designing, constructing, and renovating of IA-facilities.
This announcement will be used to fill vacancies utilizing the Direct-Hire Authority (5CFR 337.201). Category rating, veteran's preference, and traditional rating and ranking of applicants do NOT apply for this vacancy.
Requirements
Conditions of Employment
- U.S. Citizenship Required
- You will be required to have federal payments made by Direct Deposit
- You may be required to successfully complete a probationary/trial period
- A background security investigation will be required for all new hires. Appointment will be subject to the applicant's successful completion of a background security investigation and favorable adjudication.
- If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency.
- Indian Preference applies - Preference in filling vacancies is given to qualified Indian candidates in accordance with the Indian Preference Act of 1934 (title 25, USC Section 472).
- Candidate must be able to obtain and maintain a Contracting Officer Representative (COR) Level I certificate within 4 months of employment.
- To qualify for this position, applicants must meet both the Basic Requirements defined by OPM and the specialized experience statement defined under qualifications.
- All applicants must submit a full set of transcripts or copy of professional license with their application to verify qualification requirements.
- Additional selections may be made from this announcement if identical vacancies occur in the same location within 90 days from the closing date.
- The full performance level of this position is GS-12. Promotion potential in this announcement does not constitute a commitment or an obligation on the part of management to promote the employee selected at some future date.
- Career ladder promotions are at the discretion of management, and in no way guaranteed.
- The closing date of this announcement has been extended until 09/23/2024.
Qualifications
- Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
- Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico.
- Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described above.
- Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, architecture, or mathematics, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Specialized Experience
GS-11:
To qualify at the GS-11 grade level, you must have one year of specialized experience at the GS-09 grade level or equivalent performing the following: (1) Serving as either a Contracting Officer's Representative (COR), Awarding Official's Technical Representative (AOTR), and/or the Grant Awarding Official's Technical Representative (GAOTR) for Federally managed projects; 2) Assisting in managing construction projects from inception to completion; (3) Preparing or reviewing cost estimates for design and construction projects; and (4) Preparing project information materials for briefings.
OR
3 full academic years of progressively higher-level graduate education or a Ph.D. or equivalent doctoral degree or a L.L.M. in a related field of study
OR
A combination of specialized experience and education that totals 100% of the experience requirement.
GS-12:
To qualify at the GS-12 grade level, you must have one year of specialized experience at the GS-11 grade level or equivalent performing the following: (1) Serving as either a Contracting Officer's Representative (COR), Awarding Official's Technical Representative (AOTR), and/or the Grant Awarding Official's Technical Representative (GAOTR) for Federally managed projects; (2) Managing construction projects from inception to completion; (3) Preparing cost estimates and/or budgets for design and construction projects; (4) Preparing and presenting project information orally and in writing; (5) Preparing project and program related documents for management review; and (6) Monitoring of and advising on program activities.
All qualification requirements must be met by the closing date of this announcement.
Education
If you are qualifying based on your education, you MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: (1) official or unofficial transcripts are acceptable, or (2) you may submit a list with all of your courses, grades, semester, year, and credit for the course. All materials must be submitted by the closing date of the announcement.
If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.
One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.
If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education which shows the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: FOREIGN EDUCATION
Additional information
See 2024 Salary Tables here and select the duty station from Albuquerque, New Mexico to choose the appropriate pay chart. If no specific chart is listed for this geographic location, see the "rest of U.S." chart.
This position has been designated as an Incidental Operator under the Indian Affairs Motor Vehicle Safety Program and requires the incumbent to operate a motor vehicle in order to properly carry out his/her assigned duties but whose principal duties are not operating a motor vehicle and his/her position is not classified as a motor vehicle operator. The incumbent will be required annually to acknowledge and certify possession of a valid state driver's license.
Career Transition Assistance Plan (CTAP) OR Interagency Career Transition Assistance Plan (ICTAP) Programs provides placement assistance to permanent Federal employees who are surplus, displaced, or involuntarily separated. Applicants claiming CTAP/ICTAP eligibility must submit a copy of their most recent performance appraisal, proof of eligibility, and most current SF50 noting position, grade level, duty location with their application. To be considered under CTAP/ICTAP, applicants must be qualified (i.e., meet the minimum qualification requirements, including any selective placement factors; education, and experience requirements), and be able to perform the duties of the position upon entry. For more information visit: http://www.opm.gov/rif/employee_guides/career_transition.asp
Note: Bargaining Unit Status Dependent on Geographical Location.
TRAVEL AND RELOCATION EXPENSES WILL NOT BE AUTHORIZED. ANY RELOCATION EXPENSES ASSOCIATED WITH REPORTING FOR DUTY WILL BE THE RESPONSIBILITY OF THE SELECTED EMPLOYEE.
Date Posted
09/16/2024
Views
6
Similar Jobs
Interdisciplinary General Engineer/Hydrologist - Department of the Interior - Interior, Bureau of Indian Affairs
Views in the last 30 days - 0
This job posting is for a position with the Bureau of Indian Affairs in Albuquerque New Mexico The role involves complex tasks related to professional...
View DetailsCivil Engineer (Hydraulics) - Department of the Army - U.S. Army Corps of Engineers
Views in the last 30 days - 0
The job posting is for a Civil Engineer Hydraulics position in a large geographic area within the District The incumbent will be responsible for water...
View DetailsHealth and Wellness Coach - Department of Veterans Affairs - Veterans Health Administration
Views in the last 30 days - 0
The Health and Wellness Coach position is available at the Raymond G Murphy VA Medical Center assigned to the Ambulatory Care Service CARA Pain Manage...
View DetailsSupervisory Medical Supply Technician (Sterile Processing) - Department of Veterans Affairs - Veterans Health Administration
Views in the last 30 days - 0
This job posting is for a Supervisory Medical Supply Technician SP role in the Sterile Processing Service SPS at the New Mexico VA Medical Center SPS ...
View DetailsPhysical Therapy Assistant - Department of Veterans Affairs - Veterans Health Administration
Views in the last 30 days - 0
The Physical Therapy Assistant position at the Raymond G Murphy VA Medical Center involves providing professional services in Ambulatory Care Service ...
View DetailsAcupuncturist - Department of Veterans Affairs - Veterans Health Administration
Views in the last 30 days - 0
The text describes a job opportunity for an Acupuncturist at the Raymond G Murphy VA Medical Center The role involves providing professional acupunctu...
View Details