Job Description
Space is a warfighting domain. True Anomaly seeks those with the talent and ambition to build the technology that secures it.
OUR MISSION
True Anomaly delivers decisive capabilities for space superiority. We build autonomous spacecraft advanced payloads mission software and space-based interceptors — enabling the U.S. and its Allies to secure the space environment and counter threats from the ultimate high ground.
OUR VALUES
- Be the offset. We create asymmetric advantages with creativity and ingenuity.
- What would it take? We challenge assumptions to deliver ambitious results.
- It’s the people. Our team is our competitive advantage and we are better together.
YOUR MISSION
As a Senior Avionics PCB Technician on the Production and Test team you will bring expert-level craftsmanship to the assembly rework and inspection of flight-grade printed circuit board assemblies. Working alongside engineering quality and manufacturing teams you will help build and certify mission-critical avionics hardware — from early development builds through flight readiness — holding the workmanship bar that space demands.
Certifications
- IPC J-STD-001 Certified IPC Specialist (CIS) or Certified IPC Trainer (CIT) Space Addendum (Space/Hi-Rel) required
- IPC-7711/7721 Certified – Rework Modification and Repair of Electronic Assemblies (Space Addendum preferred)
- NASA-STD-8739.3 familiarity or formal workmanship training strongly preferred
- IPC-A-610 Certified IPC Specialist (Space/Hi-Rel Addendum) preferred
PCBA Build & Soldering Skills
- Expert-level hand soldering of fine-pitch SMT and through-hole components to space/hi-rel workmanship standards
- Proficiency with soldering irons hot air rework stations IR reflow and vapor phase soldering equipment
- Experience with lead-free and SnPb (tin-lead) solder processes per J-STD-001 Space Addendum
- Conformal coating application inspection and selective removal (acrylic urethane epoxy silicone)
- Potting and encapsulation processes
- Component handling and ESD control per ANSI/ESD S20.20
- Experience with staking underfill and epoxy bonding of components per NASA workmanship standards
Rework & Repair
- BGA QFN LCC and fine-pitch component removal and replacement
- X-ray inspection interpretation for solder joint verification (BGA reballing experience a plus)
- PCB trace and pad repair via repair and laminate repair per IPC-7711/7721
- Documentation of all rework operations with photographic records and traveler/log compliance
Inspection & Quality
- Microsection/cross-section inspection familiarity
- Proficiency with stereo microscopes and digital inspection systems (40x+ magnification)
- Ability to read and interpret engineering drawings schematics BOMs and assembly instructions
- Experience working under strict configuration control and traveler-based build processes
- Familiarity with nonconformance reporting (NCR) and corrective action processes
- Understanding of cleanliness and ionic contamination requirements (ROSE/SIR testing awareness)
Wire Harness Skills (Strong Plus)
- Fabrication and assembly of space-grade wire harnesses per NASA-STD-8739.4 and/or IPC/WHMA-A-620 Space Addendum
- Crimping of contacts to space-grade standards using approved tooling (DMC Daniels etc.) with pull-test verification
- Experience with space-rated connectors: Dsub Micro-D SMA/RF circular MIL-spec (MIL-DTL-38999 MIL-DTL-83513 etc.)
- Coaxial cable termination (SMA SMB TNC etc.)
- Wire routing lacing and tie-wrapping per NASA/IPC standards
- Harness continuity and hi-pot testing; use of wire harness test fixtures
- Connector backshell assembly and strain relief installation
- Familiarity with space-rated wire types (PTFE Tefzel/ETFE coax) and approved materials lists
General Skills
- Ability to work in a cleanroom environment (Class 10000 / ISO 7 or better); gowning compliance
- Detail-oriented with strong documentation habits — every step matters at space grade
- Comfortable with traveler-based and first-article build processes
- Ability to collaborate with engineers and quality assurance personnel to resolve workmanship issues
- Self-motivated and able to work with minimal supervision on complex assemblies
Experience
- Minimum 5 years of PCBA assembly and rework experience in a space defense or hi-rel environment
- Direct experience with flight hardware preferred; engineering model/qualification unit build experience acceptable
- Familiarity with AS9100 or equivalent quality management systems
Nice to Have
- Experience with automated optical inspection (AOI) or X-ray systems
- PCB design for manufacturability (DFM) familiarity
- Familiarity with thermal vacuum (TVAC) or vibration test preparation
- Experience with flux residue analysis and cleaning validation
- MPCB (multilayer/rigid-flex PCB) assembly experience
COMPENSATION AND BENEFITS
Senior Technician: $55-90/hr
- Equity + Benefits including Health Dental Vision HRA/HSA options PTO and paid holidays 401K Parental Leave
Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills education location and experience.
ADDITIONAL REQUIREMENTS
- Work Location—Successful candidates will be located near Denver CO
- Work environment—the work environment; temperature noise level inside or outside or other factors that will affect the person's working conditions while performing the job.
- Physical demands—the physical demands of the job including bending sitting lifting and driving.
This position will be open until it is successfully filled. To submit your application please follow the directions below. #LI-Onsite
To conform to U.S. Government space technology export regulations including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen lawful permanent resident of the U.S. protected individual as defined by 8 U.S.C. 1324b(a)(3) or eligible to obtain the required authorizations from the U.S. Department of State.
True Anomaly is committed to equal employment opportunity on any basis protected by applicable state and federal laws. If you have a disability or additional need that requires accommodation please do not hesitate to let us.
Skills Required
- Minimum 5 years of PCBA assembly and rework experience in a space defense or hi-rel environment
- IPC J-STD-001 Certified IPC Specialist or Certified IPC Trainer with space addendum
- IPC-7711/7721 Certification preferred
- NASA-STD-8739.3 familiarity or formal workmanship training strongly preferred
True Anomaly Compensation & Benefits Highlights
- Affordable Benefits—Employer-paid healthcare is described as fully covered with no employee premiums reducing paycheck deductions. Dental and vision coverage alongside HSA/HRA/FSA options further help manage out-of-pocket medical costs.
- Leave & Time Off Breadth—Time off is characterized as generous including a substantial PTO allotment plus U.S. holidays. Flexible time-off policies and hybrid scheduling further support recharge and flexibility.
- Parental & Family Support—Parental leave is described as generous and a dedicated mother’s room is provided. These provisions indicate tangible support for growing families.
True Anomaly Insights
What We Do
Space was once the quietest place in the universe. Now it's crowded contested and confrontational. We are True Anomaly: the only defense company focused exclusively on space defense. Founded in 2022 by ex-U.S. Space Force members True Anomaly designs and builds advanced systems for space superiority: agile and powerful spacecraft platforms mission software engineered for unmatched command and control and payloads tailored for precision sensing and effects. True Anomaly is headquartered in Centennial CO with regional offices in Colorado Springs CO Long Beach CA and Washington D.C. We are hiring and seeking exceptional talent to join True Anomaly from any technical industry or background to bring unique talents perspective and solutions. If you embrace complexity lead instead of follow showcase integrity over ego take ownership for outcomes and measure success by impact we want to hear from you.
Why Work With Us
True Anomaly exists to enable a secure stable and sustainable space environment for the US its allies and partners. We design and build spacecraft and software solutions for space superiority. If you are ready to contribute to the future of space defense we’d love to hear from you.
Gallery
True Anomaly Offices
Hybrid Workspace
Employees engage in a combination of remote and on-site work.
We are a hybrid office culture. Our employees work from offices in Denver Colorado Springs Los Angeles and Washington D.C. We recognize the importance of in-office collaboration but also the value of a flexible work and location requirements
Similar Jobs
True Anomaly
AP/AR Manager
True Anomaly
Reliability Engineer
True Anomaly
Architect
True Anomaly
Technical Program Manager
Explore More
Date Posted
05/24/2026
Views
0