Engineering Equipment Operator

This announcement may be used to fill additional positions if identical vacancies occur within 90 days of the issue date of the referral certificate.

Wages as shown are for Fresno, CA area only. Final wages will be determined at the time of selection dependent on the duty location For more information, refer HERE.

Physical Demands: Heavy physical effort is required in constantly climbing in and out of different machines, pushing and pulling levers continuously while machine is in operation, and lifting such items as opening and closing tail gates on dump trucks. Work is strenuous because of the large equipment operated, the frequent adjustments made, and the adverse operating conditions. Considerable strain is caused by the constant vibration of the equipment and the jerking and jolting from operating over rough surfaces. Frequently lifts and carries items weighing up to 50 pounds and often puts forth similar effort when pushing, pulling, turning and positioning parts, assemblies, equipment and tools.

Working Conditions: Operation of large and complicated equipment in difficult circumstances increases exposure and risk of injury. Works both inside and outside and is exposed to hot and humid weather and/or extremely cold weather. Ice, road oils, and other items such as loose gravel and rocks create hazardous conditions. The operator is subjected to noise, vibration, dust, dirt, oils, solvents, and fumes from motors and exhausts. When working inside, must ensure proper ventilation to minimize fumes while welding and/or other fumes caused by equipment or vehicles. Worker is frequently exposed to the possibility of receiving cuts, abrasions, bruises and strains while servicing and operating equipment. Follows prescribed safety practices and uses safety equipment such as protective hearing devices and hard hats.

Positions filled from this announcement may be a bargaining or a non-bargaining unit position.

ICTAP/CTAP Clearance- Current surplus and current or former displaced Federal individuals who have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP) must be well qualified for the position to receive consideration for special priority selection. Well qualified means that the applicant meets the following: OPM qualification standards for the position; all selective placement factors, where applicable; special qualifying conditions that OPM has approved for the position, where applicable; is physically qualified with reasonable accommodation, where appropriate to satisfactorily perform the duties of the position upon entry; and is rated by the organization at least at the well qualified level on all competencies. Federal employees seeking CTAP/ICTAP eligibility must submit proof that they meet the requirements of 5 CFR 330.605(2) for CTAP and 5 CFR 330.704 for ICTAP. This includes a copy of the agency notice, a copy of their most recent Performance Rating, and a copy of their most recent SF-50 noting current position, grade level, and duty location. Please annotate your application to reflect that you are applying as a CTAP/ICTAP eligible.